Can’t find what you’re looking for?
Search for it here.

HUSKEY™ LUBE-O-SEAL

Description

HUSKEY LUBE-O-SEAL is a versatile, pure synthetic, completely waterproof grease containing PTFE. It is formulated to seal out water and lubricate under the most adverse conditions.   HUSKEY LUBE-O-SEAL with its highly adhesive qualities and high load-carrying characteristics forms a tough durable film of lubrication that prevents metal-to-metal contact even under severe shock loads.  HUSKEY LUBE-O-SEAL is also NSF/U.S.D.A. H-1 *Registered and KOSHER approved, which gives it full acceptability for use in ALL areas where incidental food or potable water contact may occur.

Advantages


  • NSF/U.S.D.A. H-1 *Registered
  • WATERPROOF
  • NON-MELTING
  • CONTAINS PTFE
  • KOSHER APPROVED
  • BIODEGRADABLE
  • CHEMICALLY RESISTANT
  • NON-STAINING
  • WIDE TEMPERATURE RANGE
  • REDUCES WEAR
  • PREVENTS RUST & CORROSION
  • HIGH DIELECTRIC STRENGTH

*NSF H-1 Registration No. 059322

Usage

HUSKEY LUBE-O-SEAL with its waterproof and chemical resistant capabilities is an excellent lubricant on all sliding surfaces, gears and slow to moderate speed bearings (about 1000 RPM maximum) operating in WET or DRY conditions from 20°F to 350°F. Due to its pure synthetic base, coupled with the addition of sub-micron size PTFE, HUSKEY LUBE-O-SEAL is an excellent choice for applications in many Industries, which requires a clean, tenacious, anti-wear grease. Because of its NSF/U.S.D.A. H-1 *Registration, HUSKEY LUBE-O-SEAL is outstanding for use in food processing plants, where equipment wash down is an everyday requirement and water Industries, where contamination with conventional petroleum lubricants is a primary environmental concern.

HUSKEY LUBE-O-SEAL is compatible with most rubbers and plastics and is a superior lubricant for "O" rings. Some of its diversified uses include:

  • OPEN GEARS
  • FOOD EQUIPMENT
  • SLIDES AND WAYS
  • STERILIZER CHAINS
  • GASKETS AND "O" RINGS
  • CONVEYORS
  • VALVES
  • BUSHINGS
  • TRUNNIONS
  • POOL EQUIPMENT

CAUTION: BEFORE PRODUCT IS UTILIZED IN AUTOMATIC LUBRICATION EQUIPMENT, PLEASE CONSULT THE HUSK-ITT CORPORATION FOR RECOMMENDATION.

Package Availability

  • 3 oz. Tubes
  • Convenient Disposable Gun Loader 14 oz. Cartridges
  • 5 gal. Pail
  • 15 gal. Keg
  • 55 gal. Drum

Typical Specifications

  • Product: LUBE-O-SEAL
  •  :
  • Solid Lubricant: PTFE
  • NSF/U.S.D.A. Rating: H-1
  • Base Oil: Synthetic
  • Thickener: Synthetic
  • Color: Translucent White
  • Texture: Smooth & Tenacious
Test
ASTM Test Method
Results
N.L.G.L.Grade
2
Worked Penetration
60 Strokes
D-217
280
10,000 Strokes
D-217
290
Base Oils Viscosity,
cSt @ 100°C
D-445
200
cSt @ 40°C
D-445
7800
Pour Point, °F
D-97
20
Flash Point, °F
D-92
350
Dropping Point °F
D-566
None
Evaporation Loss, % (10 hours @ 210°F)
D-972
1.0
Corrosion Preventative Test
D-1743
PASS
Water Washout, % Loss
D-1264
0.01
Timken OK Load, lbs.
D-2509
40
4-Ball Wear Scar, mm (40 Kg, 75 ° C, 1 hr. @ 1200 rpm)
D-2266
0.57
Dielectric Strength, KV
D-877
30
NSF International Registered  NSF International Registered
Kosher Certified Kosher Certified
MSDS Sheet NSF Registration Kosher Letter Call For Quote
The name of this product or group of products is for product identification only.  HUSK-ITT Corporation. makes no warranties, representations or conditions of any kind expressed or implied, whether for merchant ability or fitness with respect to these products   The final determination of the suitability of the products for the application contemplated by the user is the sole responsibility of the buyer.  HUSK-ITT Corporation sales personnel are not authorized to amend this warranty limitation.



Return

Copyright 2014 by HUSK-ITT Corporation.